 Expand the Propeller Platform USB (#32208) with video, audio and an area for prototyping your own circuits.
With a large prototyping area and Video / Audio connections, the ProtoPlus module is an easy way to connect your own circuits to the Propeller Platform USB. All 31 I/O are exposed and standard .1" spacing lets you also connect it to a breadboard or protoboard.
This product comes as a kit and requires soldering.
Features:
- Video+Audio: Two RCA connectors let you output NTSC / PAL video and audio using the same pin assignments as the Propeller Demoboard.
- Prototyping: .100" spaced holes are connected in buss pattern and clearly marked.
- Expandable: Connect the ProtoPlus to the Propeller Platform USB or any breadboard. Use the included pin headers to connect to boards underneath and add sockets on the inner row to stack another module on top.
- Open-source: Design is available under the MIT license, Info and templates for designing your own custom modules is available at gadgetgangster.com.
Key Specifications:
- Communication: Connects directly to the Propeller Platform USB with the included Pin headers. Uses standard ".1 spacing to also connect to any breadboard or protoboard
- Dimensions: 2.8in x 2.5in (7.11cm x 6.35cm)
- Footprint: 2.8" x 2.5", Prototyping area 1.5” (15 pads) x 1.6” (16 pads). 240 pads total
- Video: The Propeller supports NTSC or PAL through the RCA connector. Video DAC is connected P11..P14
- Audio: RCA Jack with Low Pass filter (14.4kHz)
- 27 I/O available with Audio / Video. Accessing all 31 is accomplished by not connecting Video / Audio resistors
- Included 3M 2340-6211TG pin headers give extra space between modules; .508”.
- 3rd row of Vin, V50, V33, and Gnd pads
 Manual de Protoplus
Codigo de producto: 32215
|
ProtoPlus Module 
