 μOLED-128-G1
The µOLED-128-G1 is a compact and cost effective all-in-one "Smart" OLED Display with an embedded graphics controller that will deliver 'stand-alone' functionality to your project. The simple to use embedded commands control foreground and background color. They can also produce text in a variety of sizes and draw shapes (which can include user-defined bitmaps, such as logos) in 65K colors. The µOLED-128-G1 is compatible with the BASIC Stamp®, Javelin, SX and Propeller Chip. This display cannot be connected directly to a breadboard.
Features:
- 128 x 128 pixel resolution, 65K colors, Passive Matrix OLED
- 1.5" diagonal display (module size 45.5 x 33.5 x 8.8mm)
- Easy 5 pin interface to host (TX, RX, GND, Reset)
- Voltage supply 3.6V to 6.0V, 40mA nominal @ 5.0V
- 3.3V Serial interface with auto-baud feature (300 to 256K baud)
- Serial lines are pulled up and are 5V tolerant using 1K resistor on the RX line
- On-board micro-SD memory card connector to add memory for storing of icons, images, animations, etc. (64MB to 2GB cards supported)
- Built-in graphics commands such as LINE, CIRCLE, RECTANGLE, TEXT, USER, BITMAP, BACKGROUND COLOR, PUT PIZEL, IMAGE, just to name a few
Applications:
- Full Color OLED Display for any microcontroller project
- Electronic Panel Meter or Gauge for instrumentation or automotive applications
- Mini billboard for advertising
- Display for handheld diagnostic or medical equipment
 Manual del Usuario.
Manual de Conexion.
Codigo: PAVI00029925
|
propeller μOLED-128-G1
