Propeller Clip

Ocho procesadores en uno. Los clientes de este tipo de microcontroladores son ingenieros y tecnicos electronicos de empresas que requieren de un equipo capaz de ejecutar numerosas tareas en forma simultanea. Se puede programar en lenguaje Assembler o en Spin. Este microconntrolador es uno de los mas poderosos del mercado actual.

-----------------------------------------------------------------------------------------------------------------------------------------

The Prop Clip and Prop Plug each provide a USB-to-serial port connection that is convenient for microcontroller programming and communication. These tiny devices are capable of asynchronous communication at up to 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller and BASIC Stamp. The Prop Clip grips onto the edge of a PCB (1.6 mm; 1/16 in, or 0.8 mm; 1/32 in), connecting to the board's four 0.1" spaced, plated-through holes. This allows OEM boards to be manufactured with in-circuit programming capability without the extra cost of additional components or labor. If programming via 0.1" male headers is required, use the Prop Plug instead.

Features:

• USB to serial port conversion
• Capable of asynchronous communication up to 3 M baud
• Compatible with 3.3 and 5 V microcontrollers
• Connects to the edge of a PCB (1.6 mm; 1/16 in, or 0.8 mm; 1/32 in) thick with four 0.1" spaced, plated-through holes
• If programming via 0.1" male headers is required, use the Prop Plug instead

Manual de Uso

Codigo de producto: 32200