 30 Watt Solar Panel Kit
Parallax’s 30 Watt Solar Panel Kit is a do-it-yourself system that can produce up to a maximum of 30 watts of clean green electrical energy.
This is not another solar demonstration toy! It is a true “kit”—you assemble it from a pile of raw parts—and when you’re done, you will have a solar panel that produces a substantial amount of electrical power. In fact, the energy produced per square foot is comparable to many commercially available solar panels. And, when you permanently seal the panel, it can withstand the outside elements as well.
Our demonstration videos (below) show you how to properly handle and solder the delicate cells and their wiring interconnections.
Features:
- Array of 12 commercial-grade 125 mm (~5"), 2.5 watt, 16.75% efficiency monocrystalline solar cells
- UV stabilized polycarbonate base and cover panels provide outdoor durability and high light transmission properties without the fragility of glass or brittleness of acrylic
- Custom-milled base panel with a protective recess for each cell simplifies assembly
- Daisy-chain multiple units together for higher voltage/current/power output
Kit Contents:
- (13) pack of solar cells (one extra!)
- Polycarbonate base and cover panels
- Flux pen
- Cell tabbing wire
- Adhesive backed flat copper bus-bar wire
- Polycarbonate cement
- Disposable gloves
- (2) plywood "Cell Workbenches"
Replacement Cells:
- Single Cell Replacement
- 6-Pack Cell Replacements
- 13-Pack Cell Replacements
Applications:
- Portable power for camping, remote monitoring, and control systems
- Fixed power station for off-grid energy production
- Mobile robotics and solar charging stations
Key Specifications:
- Maximum Power output: 6 VDC @ 4.9amps (approx. 30 watts max.)
- Dimensions: 23.8 x 15.8 x .375 in (60.45 x 40.12 x 0.95 cm) assembled
Unassembled Kit:
 Manual de Ensamblaje.
|
