 Transmisor Easy Bluetooth
The Easy Bluetooth Serial Module is an effective and low-cost solution to free your hardware applications from wires. The module is small in size, and with its SIP header design, it can fit on any 0.1” spacing breadboards for rapid prototyping. The module is compliant with Bluetooth 1.x and 2.0 allowing it to communicate with a broad range of Bluetooth devices. The Easy Bluetooth Module is compatible with all the Parallax microcontrollers.
The module has two parts, the RBT-001 module and the SIP with voltage regulator PCB. With the on-board regulator, the module can be connected to voltages higher than 3.3 VDC (such as the Parallax Board of Education 5 VDC regulated supply) without worry of damaging the unit, while the RX and TX can utilize serial communication at CMOS and TTL levels.
Features:
- 1.x & 2.0 Bluetooth compliant
- Easy serial communication
- Class 2 operation (nominal range up to 30 m)
- Low power consumption
- On-board regulator for safe operations across various voltages
Application Ideas:
- Control a Boe-Bot robot via Bluetooth from a PC, mobile phone, or another Bluetooth module
- Communicate with a device or project wirelessly
Key Specifications:
- Power requirements: 3.3 to 5 VDC
- Communication: UART Command/Data Port supports for up to 921.6k baud rate
- Dimensions: 1.40 x 1.79 x 0.49 in (34.41 x 45.65 x 12.51 mm)
- Operating temp range: +32 to +113 °F (0 to +45 °C)
 Documentacion .. 0,5Mb
Manual de uso ... 0,5Mb
 Basic Stamp .. 0,1Mb
Java ... *. jar . *. jad ..0,5Mb
 Software extra 1,9 Mb
Codigo del producto: PAC30085 |
Transmisor easy Bluetooth
